Loader to fit Zetor Crystal / UR2 tractors.

Description

Loader to fit Zetor Crystal / UR2 heavy-range tractors.

Fits 0-Series: 8011, 8045, 10011, 10045, 12011, 12045, 16045
Fits 1-Series: 8111, 8145, 10111, 10145, 12111, 12145, 16145
(Note: UR2 chassis only — will not fit smaller UR1 models like 6211, 7211, 7711).

Good strong loader no cracks or welds. Loader only no buckets

I bought it off an 8045 and I had it on my 8011 but the tractor plus loader was too big for my tight yard. I ended up putting a loader on my smaller tractor and I have not used this since.

I had it on a 8011 but you can fit it to a 1 series like the 8111 however like all loaders on the 1 series you have to change the exhaust to come out of the bonnet and in the last picture I have the exhaust manifold you need but you will need.

I had it plumbed for a 3rd service on a joystick ( not levers )
The valve block sat in the battery box behind the brakes, the supply and return went over the back axle to the rear of the tractor.
All rams are dry and working

I do have the bolts but I don’t have all the pins for the rams at the front but these would not be hard to make.

You can buy the loader and plumbing, valve bank, 3rd service and joystick for £999
or I can strip the plumbing and sell the loader for on its own for £499
Plumbing is not for sale separate

Armagh city area - collection only