Multifuel Woodwarm Fireview Cleanburn Inset Stove 4Kw

Description

The WoodWarm Fireview 4kw inset stove was designed to give optimum heat output to the room whilst only having a minimal protrusion of 115mm onto the hearth, with easy installation.

To install this stove you just need to remove your existing iron open grate to reveal the pre-cast concrete fire brick (Chair Brick) the rear of the 4kw is designed to mimic this chair brick and needs to be sealed to this, an additional sealing panel is supplied to close any potential leaks.As with all solid fuel appliances the only air allowed up the chimney should go through the stove first.
As with all the Fireview Range this 4kw has a full riddling grate system and ashpan collection. Riddling can be performed from outside the stove keeping the door shut and the mess inside.The stove is finished in metallic black, with stainless steel handles and controls.
It is finished with a flat top canopy and includes all accessories including rear sealing plate

In regular use for over 12 years, but just underpowered for the size of large room, and eventually replaced with a 6kw free standing stove instead.
When first put in the installers didn't seal the back properly, so air leaked in around the sides and caused the stove to overheat at times, this was identified after a few months and stove reinstalled correctly. However this had caused small crack in back plate which we only noticed when stove removed so have had it welded (please see pictures to illustrate) The fire Bricks are original and have been repaired as required with firebrick cement. The condition is as seen in the pictures. An excellent stove, very controllable (provided properly sealed in!) ideal for a small to medium sized room.
DIMENSIONS
Height - 690mm
Width - 775mm
Depth - 115mm

Posted: 22 days ago

Ad ID: 1505677000