Contact TIM
TIM
DENFORD VICEROY WOOD LATHE
Romsey, Hampshire
£275
1 of 12
Description
Denford Viceroy wood lathe. Single phase 240 volt.
Approx 10 inch throw over bed and 14_ 16 inch on bowl turning side. The bowl attachment is not fitted at present but is shown in the pictures. There are several face plates for inboard and outboard ends of the spindle. Included is a Jacob's drill chuck and a live centre both with MT3 to fit the tail stock . There is also a four prong drive and a dead centre. A screw chuck and a cup chuck are also included. There are two tool rests included. Long and short.
An adjustable angle sanding table is also included which is useful and quite rare.
The lathe can be seen working. It can be dismantled into 3 prices for transport.
The handwheel on the tailstock had been repaired before I bought the lathe and has given me no issues.
Minor marking on the spindle which also has not given me a problem.
Please message with any questions or requests to view the lathe.
Posted: 4 days ago
Ad ID: 1497648183
Details
Stay Safe
"Only access Gumtree from gumtree.com and do not follow links sent by other users"
"Share photos and ask lots of questions about the items you are buying and selling"
"If an ad or reply sounds too good to be true, it probably is"
"Use the 'Reply to ad' button for your safety and privacy"
"Don't reply to email addresses hidden in text and pictures"
"Beware of fake Gumtree, eBay or escrow sites and invoices"
1 of 6