Marantz NR1711 AV surround receiver 8k 7.2 cannel ( Calibration microphone included)

Description

Marantz NR1711 is the heart of your home cinema. Do you have speakers with Dolby Atmos technology at home? Connect them to the receiver and enjoy a spatial audio. You can integrate the receiver with the HEOS multi-room system to enjoy music in the entire house. Play your favorite songs wirelessly via the built-in WiFi receiver or Bluetooth. Don't have your music collection online? You can play your songs from a USB flash drive or a hard drive via the USB connector. If you prefer to listen to the radio, you can choose from thousands of international channels thanks to internet radio.

Total Wattage: 90 W per channel
Number of Channels: 7.2
Amplifier Class: AB
Bridgeable: Yes (bi-amping the front speakers)
HDMI 2.1
Bluetooth
Connection Type: Wireless, HDMI, Wired
Headphone Jack
Networking: Wi-Fi
Media Content Source: Network streaming
Depth: 14.8 inches
Height: 4.1 inches
Width: 17.3 inches
Weight: 18.2 pounds
Audio Outputs: Speaker outputs
Multi-zone Support
HDMI Outputs: 1
HDMI Inputs:6
Subwoofer Output
Digital Audio Outputs: With Coaxial Digital Output
Built-in Decoders: Dolby Atmos, DTS:X
Digital to Analog Converter: Yes
Surround Sound: Dolby Atmos, DTS:X
Digital Sound Processor
Equalizer
Frequency Response: 20Hz – 20kHz
Sound Effects: Dolby Atmos, DTS:X
Sound Output Mode: Surround Sound, Stereo
Surround Sound Effects: Dolby Surround, DTS Virtual:X
Audio Processing Highlights: Multi-room audio
Crossover
Audio Inputs: Coaxial Digital, Optical digital
Coaxial Digital Input
Digital Audio Inputs: With Coaxial Digital Input, With Optical Digital Input
USB Input
Microphone Input
AV Receiver
DLNA Support
Digital Audio Standards: PCM (stereo), DSD, DSD128
Streaming Services: Tidal, Deezer, Spotify
Supported Sound Codec: WAV, ALAC, FLAC
HDMI Pass-Through (8K/60Hz, 4K/120Hz)
Upscaling: 8K upscaling (on all six HDMI ports)
Video Conversion/Scaling: Yes (lower resolutions up to 8K)
Video Processing Highlights: Dolby Vision, HDR 10+
RMS Power Rating: 50W per channel (8-ohm, 20Hz – 20kHz, 0.08% THD, 2ch. drive)
Total Power Output: 7 x 50 W (8 ohms, 2 channels)
Total Harmonic Distortion: 0.08% THD
Operational Power Consumption: 180 W
Power Supply Type: High-current discrete power amplifier
Stand-by Power Consumption: 0.2 W
3D Ready
Assistant Support: Amazon Alexa
Radio Type: FM radio
Radio Highlights: Internet radio
Remote Control Type: RC042SR
Included Accessories: Calibration microphone
Top Use Cases
Home Theater Setup

Posted: 4 days ago

Ad ID: 1506374756