1 ads Wood & Metal Lathes & Lathe Tools for Sale in Pitlochry, Perth and Kinross

Toolpost for lathe

I have bought a Boxford AUD. I am converting it to single phase 240v. I have removed all of the 3 phase 440v parts . They need to go as they are no use to me anymore. Main switch gear and box. Motor forward / reverse switch gear and box (no

Schepppach wood turning machine with chuck and key,record power Wg 200 grinder with spare wheel and box off accessories Miles craft pen press for use with woodturner makes beautiful pens great hobby with extras

Good quality Lunar Woodmen SP800 wood turning lathe attached to stand and accessories as shown, in good working condition Could possibly help with transportation locally.

Axminster Craft Variable speed lathe Includes: 1. Face Plate 75mm diameter faceplate. 2. Axminster drive and revolving tailstock centre. 3. 3 tool rests 150mm & 250mm. 4. Variable spindle speeds control 5. Cast iron headstock, bed and tails

Motor 1.5Hhp/415v Crosslide travel 160mm Tailstock Quill Travel 75mm Imperial Pitches 4-72TPI Metric Pitches 0.25-9.0mm Speed Range (9) 60-2000rpm Spindle Bore 38mm Distance between centre 750mm Swing Over Bed 300mm Swing Over Cross Slide 18

Large fixed steady, about 25kg. I’ve given it a clean up and everything moves nicely. Bearings are free. Centre height is about 9” from the machined flat on the base. Bore is about 5.25”. Centre of the vee on the base, to middle of machined fla

Selling a Morse Taper 5 reducing arbor. This is an old arbor, a proper quality item. NOT the Chinese junk that is so readily available on the internet. One guy described a cheaper copy on a well known buying site as a factory reject. No use t

I have for sale this highly sought after mini Lathe by Emco Unimat The lathe is fully working and comes in wooden box with extra tools and accessories as shown as well as original paper work booklet Ideal for hobby projects, model engineering

Nova 3000 wood turning lathe, 8 speed, swivel head, cast bed. It’s in good, used condition & belonged to my neighbour, a carpenter craftsman. Ideally collection only as it is a very heavy, solid piece of equipment. Please check out my other woodwo

Selling a Morse Taper 5 reducing arbor. This was in a box of lathe tools I bought. This is an old arbor, a proper quality item. NOT the Chinese junk that is so readily available on the internet. One guy described a cheaper copy on a well know

New 200 diameter chuck more details in photos. collection only.

New Lath chuck back plate see photos for size

Lathe face plate 300 diameter in new condition see photos

Lathe chuck in good condition 150 diameter see photos for size

Parkside Wood Turning Lathe German Brand The woodturning machine is intended for processing wooden work-pieces. The clamped workpieces can be rotated at three different speeds. Bench mountable -- this kit includes fixings for workbench mounting.

NEW AND SEALED THIS CHUCK SET WILL FIT LATHES WITH 3/4inch 16TPI HEAD STOCK and 1inch 8tpi HEAD STOCK 1inch 8TPI Wood Lathe Chuck 100mm 4-Jaw Self Centring Woodworking Packing List 1 * 1inch 8tpi x 3/4inch 16tpi adaptor 1 * 1inch 8 TPI Chuc

NEW Boxed Set 70mm = 2.75 inch It will fit the SCHEPPACH DM600-VARIO LATHE M18*1.5 PARKSIDE LATHE PDM 600 A1 M18*1.5 PARKSIDE LATHE PDM 600 B2 M18*1.5 AND LATHES WITH 1inch; 8TPI 4 Jaw Geared Scroll Chuck Complete Thread 1" 8TPI 4

NEW THIS CHUCK SET WILL FIT LATHES WITH 1 INCH 8 TPI HEAD STOCK 1 INCH 8 tpi Wood Lathe Chuck 100mm 4-Jaw Self Centring Woodworking Packing List 1 * INCH 8TPI Chuck 1 * worm Screw 1* T .ALLEN KEY 2 * Tightening Levers 4 SET OF JAWS If

Rare Myford 7 extra long crosslide still in myford packet sealed collect bonnybridge fk4

Ex School lathe, well maintained, fully stripped repainted with enamel paint, new drive centre and bearing centre tail stock. Brook single phase motor fitted and Nvr switch. Additional face plates, inboard and outboard. superb lathe on original stree

I have for sale my Myfold ML7 with a whole host of extras as seen in the pictures, new motor fitted recently. I also have all the original manuals. Any questions feel free to ask

Myford Metal centre Lathe has Norton gearbox screw cutting, power cross feed , power saddle slide, 240v, Myford stand, three jaw chuck,

1 x Lathe Headstock thread adaptor. M33* 3.5 Male Thread 1.5 inch 6TPI Female Thread To fit union graduate lathe onto a lathe with 1.5 inch 6TPI headstock thread. Suitable to mount a Scroll Chuck or Faceplate with an M33* 3.5 thr