5 ads for lathes lathes in All Classifieds

Large Chefree Air fryer with multiple functions: Material: Stainless steel and plastic Colour: Black and silver Capacity: 6 litres Modes: Manual, air fry, air broil, roast, bake, grill Weight: 5.7kg Power: 1660 watts Size: 42.6 x 34.3 x 34.7 c

Very good condition bowl sander with 1 spare spare arbors, arbor can also be used witha drill for power sanding

Selling a Morse Taper 5 reducing arbor. This is an old arbor, a proper quality item. NOT the Chinese junk that is so readily available on the internet. One guy described a cheaper copy on a well known buying site as a factory reject. No use t

Condition New HSW Faceplate ring 8 counter sunk holes Outside Diameter size 108mm inside Diameter size 60mm for dovetail jaws £22 each HSW Faceplate ring 8 counter sunk holes Outside Diameter size 83mm inside Diameter size 59.9mm for dovet

Selling a Morse Taper 5 reducing arbor. This was in a box of lathe tools I bought. This is an old arbor, a proper quality item. NOT the Chinese junk that is so readily available on the internet. One guy described a cheaper copy on a well know

Lathe chuck wall mount keeps your chucks safe and handy on the wall sizes available are 3/4 INCH 16TPI 1 INCH 8Tpi M33*3.5 1 1/2 INCH 6tpi 1 /2 INCH 8Tpi £23 each can post out £5

THREAD ADAPTORS FOR LATHES & CHUCKS I HAVE ADAPTORS TO FIT MOST LATHE PRICE FROM £20 TO £70 DEPENDING ON TYPE AND SIZE REQUIRED OVER 200 DIFERANT ADAPTOR THREADS IN STOKE IF YOU NEED ONE JUST TELL ME THE 2 THREADS YOU ARE AFTER AND I CAN CHECK

3 jaw lathe chuck in used but good condition with 1.1/2 x 8 TPI back plate

Pratt 3 jaw chuck in used but good condition with 1.1/2 x 8 TPI back plate

1 x Headstock thread adaptor. 1-1/4 inch 8TPI Male Thread 1.5 inch 6TPI Female Thread To fit union graduate lathe onto a lathe with 1.5 inch 6TPI headstock thread. Suitable to mount a Scroll Chuck or Faceplate with an 1-1/4 inch 8TPI

LAST ONE 1 x Headstock thread adaptor. 3/4 inch 16TPI Male Thread 1.1/2 inch 6TPI Female Thread To fit union graduate lathe onto a lathe with 1.1/2 inch 6TPI headstock thread. Suitable to mount a Scroll Chuck or Faceplate with an 3/4

1 x Lathe Headstock thread adaptor. M33* 3.5 Male Thread 1.5 inch 6TPI Female Thread To fit union graduate lathe onto a lathe with 1.5 inch 6TPI headstock thread. Suitable to mount a Scroll Chuck or Faceplate with an M33* 3.5 thr

Counterbore drill set for Cap Head Screws. Excellent quality British Set of Counterbore bits for resessing Cap head screws , Allen bolts ect . Can post

This Myford lathe is the 3.1/8” x 15” between centres ML1 model with bed and headstock cast as one. This is a very early model manufactured in the 1930’s Stripped down and rebuilt with new thrust ball bearings in headstock. Pulley system stripped/

Rare Myford 7 extra long crosslide still in myford packet sealed collect bonnybridge fk4

NEW THIS CHUCK WILL FIT LATHES WITH 3/4inch16TPI HEAD STOCK 3/4inch16tpi Wood Lathe Chuck 100mm 4-Jaw Self Centring Woodworking Packing List 1 * 3/4 INCH16 TPI Chuck 1 * worm Screw 2 * Tightening Levers £6 DELIVERY WOULD BE WITH ROYAL MA

New Lath chuck back plate see photos for size

Sharpening wheel and honing wheel Excel grinder complete with jig for sharpening woodturning gouges, chisels, skews and other turning tools. Only 6 months old. Hardly used.

4inch Self Centring Lathe Chuck 3-Jaw thread m33*3.5 & ADAPTOR M18*1.5 with reversible jaws It will fit the SCHEPPACH DM600-VARIO LATHE PARKSIDE LATHE PDM 600 A1 PARKSIDE LATHE PDM 600 B2 AND MORE POSTAGE WOULD BE £8 IF REQUIRED

Lathe chuck in good condition 150 diameter see photos for size