Heat Gun 2000W 50℃ - 600℃ Variable Temperature Dual Air Flow 1.5s Fast Heating 6 Accessories NEW

Description

【Tips】❶ If you require the variable temperature heat gun to be at【II】Position(400 ℃-600 ℃) and need to use the 3- or 5-layer focusing nozzle, it is recommended not to use it continuously for more than 10min / 3 min. Because the air outlet is very small, long-term use probably cause internal overheating of the gun body and damage it❷ When first used, the built-in mica paper may produce slight smoke due to the small amount of glue contained in it, but this is normal and will disappear within 3 min
【Stepless Variable Temperature Control】This variable temperature heat gun is equipped with an air volume adjustment switch and a stepless variable temperature adjustment dial. The switch can toggle between the strong and weak wind modes. When needed, the variable temperature output can be freely adjusted by rotating the stepless temperature control dial❶ Weak Wind "I":Air Volume 250L/min, variable temperature range 50-300℃❷ Strong Wind "II":Air Volume 500L/min, variable temperature range 50-600℃
【6 Accessories】❶ This variable temperature heat gun is equipped with 3 nozzles, heat shrink tubes and bags. These accessories enhance the versatility of your hot air gun, allowing them to be used for various applications such as adhesive processing, putty stripping, heat shrink film heating, drying, and thawing etc. ❷ In addition to the nozzles, it also includes a scraper. It can be used to scrape or strip materials that are difficult to handle with the variable temperature hot air gun alone.
【Variable Temperature Heat Gun Accessory Details】 ❶ Power cord length (power cord only): about 1.7 meters ❷ With hook for hanging the hot air gun. ❸ Set contents: variable temperature heat gun body x1, English manual x 1, Accessories: 3 Layer Focusing nozzle x 1, 5 Layer Focusing nozzle x 1, nozzle (arc) x 1, heat shrink tubes, heat shrink bags, scraper (scraper type) x 1. All accessories are designed to maximize the versatility of your heat gun across various variable temperature applications.
【Quick cooling of variable temperature heat gun】After finishing work, switch to strong wind mode, turn the temperature adjustment knob fully to the left, and wait for 5 minutes for the heat gun to cool down completely before storing it. This prevents the heat gun from overheating and prolongs its service life ❶ This variable temperature heat gun has passed the European CE certification ❷ With overload protection function, there is no need to worry about mechanical failure caused by overheating

Posted: 2 days ago

Ad ID: 1503764384