BOSS PQ-3B Vintage Bass Parametric Equalizer EQ & Broughton HPF High Pass Filter Effect Pedal £249

Description

BOSS Roland PQ-3B Vintage Bass Parametric Equalizer EQ and Broughton HPF High Pass Filter Guitar Effect Pedals rehoused together into one enclosure, so just adding a great HPF to a classic vintage Bass EQ Pedal!

Fantastic Condition, £250 ono, Collection from Newton Mearns


The BOSS PQ-3B Bass Parametric Equalizer was sold from March 1991 to December 1995

SPECIFICATIONS

Controls: Pedal Switch, Low Level, Low Frequency, Middle Level, Middle Frequency, High Level, High Frequency, Level

Connectors: Input Jack, Output Jack, AC Adapter Jack

Input Impedance: 1Mohm

Output Impedance: 1kohm

Residual Noise Level: -98 dBm or less(IHF-A) (all controls: center) 0 dBm = 0.775 V

Recommended Load Impedance: 10kOhm or greater

Recommended AC Adapter: PSA Series

Indicators: CHECK Indicator (Serves also as battery check indicator)

Power Supply: DC 9V Dry Battery (9V type) or AC Adapter BOSS PSA-120, Optional

Current Draw: 25mA (DC 9V)

Dimensions: 70(W) x 55(H) x 125(D)mm - or - 2-3/4(W) x 2-3/16(H) x 4-15/16(D)inches

Weight: 410g/15oz



Broughton Hand Made in Canada HPF High Pass Filter Effect Pedal

The High Pass Filter is the perfect utility pedal for cleaning up the low end. It is a 12dB per octave low frequency filter. The knob controls the cut-off frequency and ranges continuously from 25Hz to 190Hz. True bypass switch. Dimensions: 3.7" x 1.6".

The stock input impedance is 1MΩ. If you have an acoustic pickup that requires a specialized input impedance, write it in the notes during check-out, and we will accommodate the request at no extra cost. The output impedance is 100Ω. This device will work with active or passive instruments, as well as with other devices such as pedals, preamps, or effects loops.

The High Pass Filter requires a DC power supply (not included). The DC supply should be a standard Boss style connector, center negative polarity. It can accept 9 to 24 volts. Although 9 volts is sufficient for most applications, higher voltages will provide more headroom when using the pedal with line level signals. The current draw is approximately 10 mA. A 24 volt power supply may be purchased separately.

Ad ID: 1491172373