Ford capri 2.8i xreg

Description

Mk 3 model with many mods
X pack kit
Cosworth engine, Bob type. 200 easy hp 230 torque's, Good oil pressure
DTA ecu and custom made engine wiring loom
Brembo brake calipers,
290mm x 26mm discs, (standard size is 247mm x 20mm )
Standard rear drums.
Brake balance valve, although it was fitted when i had a disk kit on the rear now removed, this just got left in place.
Non lsd axle, just been painted, and had new front diff seal, and new gear oil fitted.

Rear duck tail spoiler.
TSW 15" x7" wheels wheel spacers fitted.
4 Yokohama track tyres, half worn. could change the wheels for a set of 15"x 7" 7 spoke capri wheels if preferred.
Battery and plumbed in fire extinguisher fitted behind drivers seat, no rear seats fitted.

Coil over front suspension
Ford scorpio radiator and cooling fans, one works auto, one on manual control.

This car has not been used for 6 years now and before that was a track day car used mostly at knock hill probably for about 6 years, the only problems I had with the car in 7 years of track days were some oil leaks mostly the cam covers and two broken drive shafts

Known jobs to do
Slight power steering leak
Oil leak from I think cam cover on drivers side. or might be head gasget

Rear spoiler needs refitted,
The car was brush painted, simply because I didn't want the cost of a respray just to use it on track where the possibility of damage was high,
I will add any more info as and when it comes to mind.
Engine wiring loom for the 2.8i engine is still attached to the car if anybody wants to convert back to standard. Could supply an engine, one that was running when removed but would benefit from a rebuild. Price is £4750

Ad ID: 1387972779

Exact specification may vary from the details on this page. Please contact the seller to reconfirm any details before purchasing. See Terms & Conditions for further information.