Land Rover Series 2 and 3 Genuine Station Wagon Hard Top Sides with Sliding Windows

Description

Offered here is a Pair of Genuine Land Rover Station Wagon Hard Top Sides for a Series 2 2A and 3 SWB

These are the Factory produced Station Wagon Hard Top Sides for OS and NS comprising of -

1 x OS Panel with sliding windows and fixed rear window
1 x NS Panel with sliding windows and fixed rear window
All glasses are present and undamaged
4 x window catches
1 x OS Top hinge for Rear Door (door not included)
Channels for sliding windows are good
Some light cosmetic restoration would make these very presentable.

These are becoming increasingly rare, if you are creating an 'estate' Land Rover then these Station Wagon Hard Top Sides are the ones to have. Suitable for the 88 inch SWB variant only, including Air Portable Lightweight.

These will also fit the rear section of the 109 inch Series 2, 2A and 3 in models which have the five door station wagon configuration ie not suitable for the 2 door 109 inch. Not suitable for Series 1 variants.

Genuine Land Rover Station Wagon Side panels - not to be confused with a converted van style hard top sides or aftermarket sliding window frames.

Prospective buyers should use the following unpacked weight and dimensions to obtain an estimate of courier shipping costs -
Each panel weighs 16.2Kgs
Length 134 cms
Width 53 cms
Depth 34 cms


Other Land Rover Series parts available

Land Rover Series 3 Ex Military Lightweight Air Portable 24v FFR very original - Project
Front windscreen frame with decent glass for Series 2 and 2A
4 x LWB 109 inch original steel 16 rims for tubed tyres
Land Rover V8 and Classic Range Rover original pressed steel 16 inch rims
Land Rover Series 1 86 or 88 Tailgate side bracket
Land Rover Lightweight Air Portable rear tub top cappings in galvanised steel OS & NS
Land Rover Lightweight Air Portable rear tub top panels with cappings OS & NS
Genuine Land Rover SWB Station Wagon Safari Tropical Roof panel only with Vents, Alpine Lights etc


Other Classic Mini projects or parts

'F Reg' 1988 Classic Mini Designer 998cc manual in Black. Project
'M Reg' 1994 Classic Mini 35th Anniversary 1275cc manual with V5c - Easy Project
'D Reg 1966' Hustler4' Adams designed utility with Mini running gear (smaller version of 6 wheeler)
'D Reg 1987 Mini 'Park Lane' Project manual with V5c and VIN plate
'K Reg' 1993 Mini 'British Open - V5c, manual Project
'Q Reg' Mini based Gecko Kit Car Utility design similar to a Mini Moke - restored, running and driving
Mini Stainless steel rear light protection bar (believed to be Wood & Picket)
Genuine Mini Moke Cagiva part completed project, running and bodywork restored in White


Other 4 x 4 vehicles and parts

Suzuki Jimny Estate 2002 '02' Convertible, with V5c, for refurbishment
Toyota Rav4 Mark 1 Petrol 3 Door SUV, with V5c, MOT recently expired, light project.
Suzuki Grand Vitara 3 Door Convertible '53 plate' with V5c decent - Project
MG Midget hood frame
MG Midget rear boot lid
Jeep Wrangler 4.2 YJ Petrol 1987 RHD column shift automatic convertible, steel half doors, original.
Grandin Dallas factory built French 'jeep' featuring Peugeot 205 1430cc running gear RHD + V5c

Serious enquiries only
Offers below the asking price are NOT required
Collection preferred but courier sipping to UK addresses is possible at additional cost
These are heavy and bulky items, this will be reflected in the cost of shipping
If you can view these parts - assume they are still available

Ad ID: 1480271574

Exact specification may vary from the details on this page. Please contact the seller to reconfirm any details before purchasing. See Terms & Conditions for further information.