Campervan 5mtr Sterling Power BB1260 12v 60amp kit (split relay charger)

Description

Campervan 5mtr Sterling Power BB1260 12v 60amp kit (split relay charger). Bought for a customer campervan project that didn't go ahead. Brand new, never been out the box. RRP £380. Collection only from Kilwinning, no offers thanks.

Full specs here:

Suitable for all modern vehicles.

The B2Bs have become extremely popular as they fast charge batteries as you cruise along without the need for complex wiring, touching your alternator, voiding the alternator's warranty and tampering with the electronic control units (ECUs).

You can provide the onboard batteries with a fast 4 stage charging profile with a very simple and speedy installation. All of the benefits of advanced charging without any of the drawbacks.

Simply connect the B2B between the battery being charged and the battery you wish to charge.

You will be supplied with everything needed to install this kit with either cable and components to make up yourself or with the leads pre made for a simpler install



Please select kit option above for either a cable and component kit to make the leads up yourself or a kit with pre made leads for a simple install without the need for expensive crimping tools.



Cable + Components Option

BB1260 12v 60amp battery to battery charger
5.5m Red 110amp 16mm Cable
6mtr Black 110amp 16mm Cable
5mtrs 1.5mm Red Cable ( Optional Ignition Live feed )
1 x pair 8mm post type battery terminals
2 x strip link fuse holders
4 x 100amp midi fuses
Terminals + heat shrink
10 x cable tie bases
15 x cable ties
2 x sticky pads to use on fuse holders if required
15 x 8x3/4 screws
1 x 3mm drill bit
5mtrs black conduit to protect cable
wiring instructions plus after sales support if required




Pre Made Leads Option

BB1260 12v 60amp battery to battery charger
1 x 250mm red 110amp 16mm starter battery to fuse holder lead (M8 to M6) terminals
1 x 5mtr red 110amp 16mm fuse holder to charger lead (M6 to M6) Terminals
1 x 250mm red 110amp 16mm fuse holder to leisure battery (M8 to M6) terminals
1 x 5mtr black 110amp 16mm earth lead for charger (M10 to M8) terminals
1 x 1mtr black 110amp 16mm earth lead for leisure battery (M8 to M10) terminals
5mtrs 1.5mm Red Cable ( Optional Ignition Live feed )
1 x pair 8mm post type battery terminals
2 x strip link fuse holders
4 x 100amp midi fuses
1 x pack spare terminals + heat shrink
10 x cable tie bases
15 x cable ties
2 x sticky pads to use on fuse holders if required
15 x 8x3/4 screws
1 x 3mm drill bit
5mtrs black conduit to protect cable
wiring instructions plus after sales support if required


The two long red leads in the pre made lead option will be supplied as one long lead in your kit with terminals to suit the fuse holders on each end.

This lead will simply need to be cut to suit the location of where the battery charger will be fitted as the connections to the BB1260 are via a screw type connections.

If you would like me to supply the lead in two parts please just add a note to your order with the measurements needed and we will supply them as required.

We can offer this kit to any specification to suit any vehicle. Please contact us for more details

Features:

Multiple Activation Modes: Automatic for most non vehicle applications,

Manual for remote activation.

Regenerative braking (requiring ignition feed),

Automatic regenerative braking, requiring no ignition feed.

Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mde allows you to override this.

Safety features:

100% fire proof plastic box.

No screws to corrode.

Thermal power reduction.

Multi stage fan cooling

Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down.

Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages.

B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V).

9) Customizable Profile: Choose your own charging profile on the front panel.

9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid.

4 stage battery charging: The B2B charges batteries between 5-20 times faster than a stand alone alternator.

Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking).

Ad ID: 1472723994

Exact specification may vary from the details on this page. Please contact the seller to reconfirm any details before purchasing. See Terms & Conditions for further information.