22 ads for myford-lathes in All Classifieds

Super 7 lathe with power cross feed. On it's original Myford stand with back splash guard and on adjustable riser blocks. Has a complete set of change wheels for metric and imperial thread cutting. Fitted with a Burnerd 3xjaw 'Griptru' 4" chuck with

Well looked after ML7 lathe with gearbox, clutch, power feed, variable speed control unit (no need to change belts), 2 milling slides, 1 swivelling, 4 faceplates, 4 chucks with extra jaws, one of which is an excellent griptrue chuck (very expensive o

Myford Super 7 lathe, 240v, in working order. This is quite an early model of the Myford Super 7 metalworking lathe, in used but useable condition. Stand included, but no tooling or tailstock, hence bargain price. Pickup from Kilwinning, ve

Runs well, needs tidying up 240v Single Phase (not much in the way of tooling, and does not have a 4 jaw chuck) Sold on behalf of Kelso Mens Shed Collection only

Myford 7 lathe with stand. 240 vlt can be seen working Good working order

A Myford super 7 topside in decent used condition. It has imperial graduations and will rotate around 360 degrees.

Machine no longer required. 4 jaw and face plates as shown on pics.

Myford ml10 lathe 1930s for sale. Works but needs a new v belt as it's an old and the leather has cracked. Comes with a 3 and 4 jaw chuck. Needs a bit of tlc. Collection only. Only reason for sale is I don't have room for it. Would consider a swap, t

For sale a Myford lathe complete with the stand. Comes with a draw full of bits plus a large box with various parts for the lathe. Chuck, drill bit and other items. Also comes with a cover. This was working all fine last year the last time it was

Myford Super 7 Lathe in good used condition with no tight spots on the carriage travel Adjustable bed stop 3/4 HP motor New belts fitted Mounted on a cabinet and tray with a Dewhurst reversing switch and start/stop switch and has a good amount of

myford lathe ml7 change gear quadrant pick up only cash

Owned this for 12 years and now only turns down blanks as I do mostly CNC work now. Never been abused Comes with back plates and a 6" 4 jaw chuck(not pictured)

This Myford lathe is the 3.1/8” x 15” between centres ML1 model with bed and headstock cast as one. This is a very early model manufactured in the 1930’s Stripped down and rebuilt with new thrust ball bearings in headstock. Pulley system stripped/

Myford thread dial indicator for ML7 or Super 7 lathes Good working order Postage available at cost If ad is live then the item is still available

SOLD Circa 1970 and in VGC with almost no run out and nil end float to the headstock. Well looked after but little used with a 6.5" diameter capacity. * Forward and reverse switch * Imperial leadscrew with clutch * Change wheels * 6&quo

myford end cover from a super 7 lathe(not gearbox cover) good condition. no cracks. price includes delivery. Payment through PayPal

Myford lathe ML7 electric motor and switch 240v . Was running well before it was removed. Motor is 1/3 HP

Experience precision and control with the Myford ML7, now fitted with a Tri-Leva speed-change system for smooth and accurate adjustments. This 240v single phase model is an ideal addition for those requiring reliable transfer capabilities in their me

Myford ML7 with new motor and variable frequency drive. Runs off a standard domestic 3 pin plug. It has a freshly reground bed and lots of new parts including belts,oilers, myford 4 way tool post,bed wiper and shims. Comes with 3 jaw chuck,face plate

Resilient mount 0.75KW(1HP) motor. taken from my myford super 7 lathe. motor approx 2 yrs old. Upgraded to 3 phase.Very good condition. 5/8 dia; shaft. Buyer collects.

Taken from a myford super 7 lathe when upgraded with a gearbox. Price include postage, payment through PayPal

Myford ML7 lathe. All works as it should. Bed is in great condition and back gears have all the teeth! Rewired with no voltage emergency stop and stop go switch. Comes complete with 3 jaw chuck,face plate,drive plate, 2mt tailstock chuck, myford 4 w