16 ads Wood & Metal Lathes & Lathe Tools for Sale in Highland

THREAD ADAPTORS FOR LATHES & CHUCKS I HAVE ADAPTORS TO FIT MOST LATHE PRICE FROM £20 TO £70 DEPENDING ON TYPE AND SIZE REQUIRED OVER 200 DIFERANT ADAPTOR THREADS IN STOKE IF YOU NEED ONE JUST TELL ME THE 2 THREADS YOU ARE AFTER AND I CAN CHECK

1 x Lathe Headstock thread adaptor. M33* 3.5 Male Thread 1.5 inch 6TPI Female Thread To fit union graduate lathe onto a lathe with 1.5 inch 6TPI headstock thread. Suitable to mount a Scroll Chuck or Faceplate with an M33* 3.5 thr

4inch Self Centring Lathe Chuck 3-Jaw thread m33*3.5 & ADAPTOR M18*1.5 with reversible jaws It will fit the SCHEPPACH DM600-VARIO LATHE PARKSIDE LATHE PDM 600 A1 PARKSIDE LATHE PDM 600 B2 AND MORE POSTAGE WOULD BE £8 IF REQUIRED

Condition New HSW Faceplate ring 8 counter sunk holes Outside Diameter size 108mm inside Diameter size 60mm for dovetail jaws £22 each HSW Faceplate ring 8 counter sunk holes Outside Diameter size 83mm inside Diameter size 59.9mm for dovet

1 x Headstock thread adaptor. 1-1/4 inch 8TPI Male Thread 1.5 inch 6TPI Female Thread To fit union graduate lathe onto a lathe with 1.5 inch 6TPI headstock thread. Suitable to mount a Scroll Chuck or Faceplate with an 1-1/4 inch 8TPI

LAST ONE 1 x Headstock thread adaptor. 3/4 inch 16TPI Male Thread 1.1/2 inch 6TPI Female Thread To fit union graduate lathe onto a lathe with 1.1/2 inch 6TPI headstock thread. Suitable to mount a Scroll Chuck or Faceplate with an 3/4

NEW THIS CHUCK WILL FIT LATHES WITH 3/4inch16TPI HEAD STOCK 3/4inch16tpi Wood Lathe Chuck 100mm 4-Jaw Self Centring Woodworking Packing List 1 * 3/4 INCH16 TPI Chuck 1 * worm Screw 2 * Tightening Levers £8 DELIVERY WOULD BE WITH ROYAL MA

New H.S.W. DIAMOND TOOLS THIS CHUCK SET WILL FIT LATHES WITH M18*I.5 HEAD STOCK THREAD AND 1 INCH 8TPI Wood Lathe Chuck 100mm 4-Jaw Self Centring Woodworking IT will fit any lathe with M18 (1.5) HEADSTOCK THREAD IT WILL FIT THE PARKSIDE PDM

Vintage "S" Bowl Tool Rest Post size 22mm Wood Lathe , please use pictures as part of the description The tool rest is 24.5 cm long and 12cm high Will fit various lathes The pictures show all that is included, and the condition so plea

NEW 5 INCH Self Centring Wood Lathe Chuck 4-Jaw thread 3/4'' 16 TPI The perfect lathe accessory for any woodturner Hold bowls, spindles, and other unwieldy wood lathe projects Included worm screw for even more woodturning options chuck diamet

NEW full box set 4 Jaw Geared Scroll Chuck 140mm = 5.5 inch Normal price is £299 now £239 M30 (3,5) THREAD 4 Jaw Geared Scroll Chuck Set Including: 1 pc 4 Jaw Geared Scroll Chuck 1 pc Wood Screw 1 pc T Handle Allen Wrench 2 pc Cross Handl

6inch Self Centring Lathe Chuck 4-Jaw thread 3/4 INCH16TPI Will fit lathe with 3/4 INCH;16tpi Jaws are reversible Chuck diameter 152mm / 6 inches YES CAN POST OUT £8 P&p

Used wood turning lathe in good condition, complete with manual. The lathe has a capacity of 510mm between centres (depending on the centres fitted) and with a bowl turning capacity of 355mm. Has variable speed, three belt ratios and reverse.

Draper wood lathe in good condition comes with lots of chisels and a few different headstocks. All works well except for the digital speed readout. This does not effect the use of the lathe at all. Lathe alone cost well over 200 new and the chisels a

Coronet "Major" lathe, been sitting for a while in a shed, while need some TLC to restore it.

NEW AND SEALED THIS CHUCK SET WILL FIT LATHES WITH 3/4inch 16TPI HEAD STOCK and 1inch 8tpi HEAD STOCK 1inch 8TPI Wood Lathe Chuck 100mm 4-Jaw Self Centring Woodworking Packing List 1 * 1inch 8tpi x 3/4inch 16tpi adaptor 1 * 1inch 8 TPI Chuc