PRUSA3D quality filaments for 3D printer 1kg on each reel orange and blue as pictured

Description

PRUSA3D quality filaments 1kg orange and blue as pictured. Blue filament never been used 1kg still on the reel. Orange has been used but only a little, reel got damaged but not affecting use.

Brand new cost £27 each colour. I will do both reels for £35.

Please see specification below:

About PLA
PLA is the easiest material to print. It is inexpensive and suitable for beginners and advanced users alike. It is capable of printing detailed models, figures, and quick prototypes that don’t require increased mechanical, chemical, or temperature resistance.

PLA is the most widely used filament, known for its great looks and ease of printing. It is an excellent choice for large objects because of its low thermal expansion, which results in minimal warping. At the same time, its low melting temperature makes it suitable for small parts as well.

While PLA may not be as tough or durable as some advanced materials, its versatility makes it ideal for a range of applications, including large objects, miniatures, concept models, and prototypes that don’t need to be extremely durable.

Printing Setup
Nozzle 215 °C
Heatbed 50-60 °C
Recommended Steel Sheet Smooth PEI / Textured / Satin
Before printing, learn about print surface preparation in our dedicated article and material table.
Basic Attributes
Easy to print
Suitable for prints of any size
Hard
Low warping
Brittle
Poor high-temperature resistance
Difficult to sand (hard material, melts easily)
Beginners tips & tricks
Popular among both beginners and advanced users
PLA is the easiest-to-print filament we make. It’s reliable and it doesn’t require any print preparations or difficult post-processing methods. If you’re new to 3D printing, it’s best to start with PLA before using other materials.

Sanding
When post-processing PLA, it’s better to use wet sanding. Without water you’ll quickly start heating the plastic by friction, it will melt locally and deform. Also, without water, the sanding material would clog easily.

Gluing
PLA can be glued with many types of glue. We recommend using superglue for most of the parts. Certain PLA filaments may be also glued using acetone, however, it strongly depends on the various additives and colors used.

Notes

Ad ID: 1499053748