Alto Professional TS 415 True Sonic Speakers

Description

Pair of Alto Professional TS 415 Speakers for sale. Like New, only used a few times. Comes with Power Leads, Covers and Original Boxes.

Alto Professional TS415 15" 2500W Active PA Speaker (single)
2500-watt 15-inch 2-way powered loudspeaker with Bluetooth, DSP & app control

Large 15-inch version of Alto's fourth-gen TrueSonic PA speaker, featuring more power and better sound quality than the older TS3 model, plus advanced Bluetooth integration for streaming and remote control.

Supplier's Notes:
2500-watt 15-inch 2-way powered loudspeaker with Bluetooth, DSP & app control

TrueSonic TS4 from Alto Professional

Louder. Clearer. Smarter.

Where TS3 exceeded expectations, TS4 redefines them completely.

Building on the legacy of the best-selling TrueSonic speakers, the TS4 Series delivers increased power, clearer sound, and advanced Bluetooth functions including streaming, speaker linking, and App control.

Compact, lightweight, and designed for reliability, the new TS4 Series makes it simple to get great live sound at every event.

True Sonic Power

Whether you need a powerful vocal PA or club-shaking bass performance for a DJ set, TS4 speakers deliver loud, clear, room-filling sound for any application.

With a 15-inch woofer, and a 1.4-inch compression driver, TS415 delivers 2500W of class-leading power and clarity in equal measure.

Free Alto App for remote configuration and control

Available free for both Android and iOS, the Alto App gives hands-on remote control over Bluetooth levels, Speaker Use Modes, Custom EQ and Sub Size selection. Further, True Wireless Stereo linking can be configured remotely via the app to save time during setup.

Built-In 3-channel mixer

Every TS4 features an integrated 3-channel mixer, with two Mic/Line input channels and a dedicated Bluetooth channel. The Mic/Line channels feature XLR/TRS combo jacks and can be used with microphones, instruments, and line-level signals without the need for additional hardware or adjustment. Just plug straight into the rear panel and you're up and running.

Simple Bluetooth Streaming & Speaker Linking

The ideal high-powered streaming solution, TS4's built-in Bluetooth connectivity makes it easy to pair your laptop, phone or tablet and get the music pumping in no time at all.

With the True Wireless Stereo function you can stream Bluetooth audio to two TS4 speakers in perfect stereo without the need for any cables.

DSP Modes for the best sound in every application

TS4's three preset "Speaker Use" modes let you optimize the speaker for any application, so you'll get great sound every time at the touch of a button. For even more control over your sound, you can configure a Custom EQ within the Alto App and remote adjust the settings from any listening point in the venue. You can even save your favourite Custom EQ setting direct to the TS4 for easy recall whenever you need it.

Versatile and Reliable

From the high-quality drivers to the fanless class D amplifiers, every aspect of the TS4 Series has been designed for superb reliability, whether used for mobile gigs and performances or fixed installation.

Each speaker features a lightweight, sleek, black box design that can be used as the application demands - freestanding, as a wedge monitor, pole-mounted or suspended via the integrated suspension points

Applications

Solo performers
Musicians and Bands
Mobile DJs
Gymnasiums, fitness centers, and dance studios
Houses of worship
Theatres
Bars, restaurants, clubs
Special events, presentations, and weddings

Technical Specifications

Output Power: 2500W
Drivers Low-Frequency: 15.0" driver, 2.5" (63 mm) high-temperature voice coil. 1 x 800 W RMS @ 2 O.
High-Frequency: 1.0" exit ceramic driver with 1.4" (35 mm) coil. 1 x 450 W @ 4 O.
Crossover Frequency: 2 kHz
Maximum SPL: 135 dB (peak), 132 dB (continuous) (dB-SPL @ 1 m)

Frequency Response: 44 Hz - 20 kHz (+/- 3 dB)
Frequency Range: 33 Hz - 20 kHz (-10 dB)
Horn Coverage: 90- horizontal x 60- vertical (nominal)
Connectors:(2) XLR+1/4" (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link), (1) IEC power cable input
Input Impedance Line: 10 KO balanced, 20 KO unbalanced, Mic: 1.2K
Line Gain/Volume Control Range: -8 to 0 dB, +4 dBu nominal, +10 dBu for max output
Mic/Inst. Gain/Volume Control Range: -8 to +50 dB
USB Charging Port: 5V 2.1A
Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
Indicators: (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped), (1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
Power Connection: IEC
Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
Consumption: 1100W
Fuse: 100-120V T15AL AC250V; 220-240V T6.3AL AC250V
Protection: Electronic clip, thermal, and transducer overdrive protection
Enclosure: Injected Moulded Enclosure and Perforated Metal Grille
Mounting/Installation: Standard 36 mm pole socket, flown application with integral M10 suspension points, or in a wedge monitor position
Operating Temperature: 10-C to 45-C (14-F to 113-F)
Dimensions (height x width x depth): 25.3" x 16.4" x 15.8" / 643 x 417.5 x 402 mm
Weight: 38.0 lbs. / 17.2 kg

Features
2500W for powerful performance
FREE Alto App (iOS/Android) for remote configuration and control
Bluetooth audio streaming direct from device
On-board DSP with 4 Speaker Use modes (inc. Custom EQ via App)
True Wireless Stereo speaker linking via Bluetooth
Integrated 3-channel mixer with dual XLR ¼-inch combo inputs, mic/line switches and independent level controls
XLR Mix output, Speaker Use, and Sub Size Controls
15" driver, 2.5" (63 mm) high-temperature voice coil
1" exit ceramic driver with 1.4" (35 mm) coil
Lightweight enclosure for easy transport, set up and installation
Versatile design - pole-mountable, wedge monitor or flown application with integral M10 suspension points
Powerful and efficient class D amplifiers with fanless cooling design to run cleaner, quieter and with greater long-term reliability
Specifications
Active/Passive Active
Frequency Response 44 Hz - 20 kHz
Low Frequency Driver 15.0" driver, 2.5" (63 mm) high-temperature voice coil. 1 x 800 W RMS @ 2 O.
High Frequency Tweeter 1.0" exit ceramic driver with 1.4" (35 mm) coil. 1 x 450 W @ 4 O.
Crossover 2 kHz
Output Power 2500W
Inputs :(2) XLR+1/4" (6.35 mm) TRS combo inputs (Balanced), (1) IEC power cable input
Outputs (1) XLR output (Link)
Controls Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
Flying & Mounting Hardware Standard 36 mm pole socket, flown application with integral M10 suspension points, or in a wedge monitor position
Power Supply Mains Adapter
Voltage (v) 240
Enclosure Injected Moulded Enclosure and Perforated Metal Grille
Dimensions (mm) 418 x 643 x 402
Weight (g) 17200

Ad ID: 1502543451