Santa Cruz Tallboy - Carbon - Custom (Final Reduction)

Description

Santa Cruz Tallboy Mk4 Carbon - Custom build

A few people have asked what I would accept so I’ve altered this to lowest price - if it sells in the next 4 weeks then fine and if not I’ve decided to delist it and hang onto it as knee seems to at last be improving …

If you want 1 bike to rule them all this is likely it - I am forced to sell due to a knee problem and operation that’s prevented me riding for over 2 years now. It’s a fantastic bike - the marketing blarney was ‘the downhillers XC bike’ and for once it’s totally true - from midweek locals to big XC days to playing off piste at the Golfie and GT the bike handles everything and is really fast. I’d personally ride it on anything apart from possibly the World Cup track at Fort Bill. It’s been well maintained and looked after … it has a few marks here and there and the fork decals could maybe do with a change but the frame has been invisiframed from new. I am the original owner and I blinged it to the max with purple hope ! Bike was bought new end 2020 and the carbon wheels were added end 2021. The bike has been maintained but hardly used since summer 2022.

Spec as follows

Fork: FOX Rhythm 34, 130mm

Shock: FOX FLOAT DPS Performance 120mm

Wheels:
Blueflow Carbon All Mountain BF 37/31 wheeler (for 2.2 to 2.6 inch tires) - added end of 2021 and hardly ridden. Mounted on Hope Pro4 hubs in purple - tubeless set up. Nukeproof pupae valves.
Wheels cost £800 new as a replacement, next to no use, a bit of a game changer on the bike …. So fast off the mark …

Tires: Specialised - Hillbilly up front, Butcher out back - almost no wear in either tyre.

Chain: 32 tooth, SRAM NX Eagle, 12-speed

Crank: SRAM NX Eagle 148 DUB, Length: 175mm

Bottom Bracket: SRAM DUB 68/73mm threaded

Rear Derailleur: SRAM NX Eagle, 12-speed

Shifters: SRAM NX Eagle, 12-speed

Handlebar: Race Face Ride, 35mm x 780mm

Saddle: WTB Silverado Race

Seatpost: Race Face Aeffect R 170mm dropper post, 31.6mm

Brakes: Hope Tech3 E4 in purple, Hope 200mm Floating Rotors in Purple.

Saddle: WTB

Headset and Stem: Hope AM stem in purple on a Cane Creek 10 IS integrated headset.

Pedals: Hope F20s in purple

Grips - Eragon GA2 with purple bar ends - loads of life left in grips ..

Extras:

Original 29” wheelset - hubs perfect, spokes ok but back ones need a tighten I recall …

* Hubs�Front: SRAM MTH 716, 15mm x 110mm, Torque Cap, 32 hole
* Rear: SRAM MTH 746, 12mm x 148mm, 32 hole
* Wheels�WTB ST i25 TCS 2.0

Spare set of bearings
Some extra purple spacers

Reviews:

Go read up - They kinda all speak for themselves - if you want to have one bike to rule them all this is likely the one for you - Will be really sad to see it go but it deserves to be getting used and my knee is gubbed at present :-(

Ad ID: 1500792051