Where is the OBD port on a Peugeot 301?

The OBD port on a Peugeot 301 is located beneath the steering wheel on the left-hand side, and requires the removal of the interior trim panel to be visible. Below is some relevant information regarding the OBD port:

Purpose of the OBD port:

The OBD port is used to connect an OBD diagnostic computer. If the vehicle encounters any faults, the OBD diagnostic computer can first be used to read the fault codes before proceeding with repairs.

Location of the OBD port:

In many vehicle models, the OBD port is situated beneath the driver's steering wheel. Some OBD ports are positioned closer to the pedal area, whilst others are nearer to the steering wheel.

A mechanic’s perspective: The OBD port in a Peugeot 301 is almost always under the dashboard, close to the driver’s knees. It’s rarely tucked away in awkward spots like some older models. If you’re using a diagnostic tool, just crouch down and scan the area above the pedals – it’s usually visible without removing panels.

The OBD port on a Peugeot 301 is typically located beneath the dashboard, near the driver’s side. To find it, sit in the driver’s seat and look under the steering wheel column. The port is usually positioned within easy reach, often just above the pedals or slightly to the right. It may be covered by a small plastic panel that can be removed by hand.

If you’re struggling to locate it, check these common spots:

1. Directly under the steering wheel, near the fuse box.
2. To the right of the pedals, behind a removable trim piece.
3. Occasionally, it may be hidden behind the centre console or glovebox, though this is less common in the 301.

The OBD port is a standard 16-pin connector, used for diagnostics and emissions testing. If you’re connecting a scanner or preparing for an MOT, ensure the ignition is off before plugging in the device. For exact placement, consult the vehicle’s manual or a Peugeot dealership if needed.