Intel Quad Core Processor, ATX Motherboard and Backplate, 8GB DDR3 RAM and Heatsink
£135 Wallington, London

Sorry, this ad is no longer available.

NOTE: The parts i'm selling as used and may show signs of dust and wear here and there but they're all fully working.

I will list here what you're getting in the sale, and further below I will give you some more details on them items:


1 x Quad Core Intel Q6600 Slacr Go Processor
1 x Scythe Infinity / Mugen Heat-Sink (for above processor)

1 x Foxconn Blackops ATX (Including Back Plate) Motherboard
4 x 2GB Intel Extreme DDR3 RAM (total 8gb)


I want CASH on collection, from either 5 Ways (Purley Way) Croydon or by London Bridge; your choice.




INCLUDED PROCESSORS OFFICAL SPEC:

1 x Intel® Core™2 Quad Processor Q6600 (8M Cache, 2.40 GHz, 1066 MHz FSB) SLACR GO


--------------------------------------------------------------------------------------------------------





MOTHERBOARD MAKE AND MODEL:

- Make: Foxconn
- Model: Blackops
- Type: ATX Motherboard



MOTHERBOARD CAN ALSO SUPPORT THE FOLLOWING PROCESSORS:

Intel® Core™2 Quad, Core™2 Extreme, Core™2 Duo, Pentium® Dual-Core, Pentium® Dual-Core processors, Socket T (LGA775) (Supports Intel® next generation 45nm Multi-Core processors)



MOTHERBOARD THE FOLLOWING FSB SPEEDS:

- 2000(oc**)/16001333/1066/800 MHz (FSB)



MOTHERBOARD SUPORTS THESE TYPES OF DDR3 RAM:

- Dual Channel DDR3 1600/1333/1066/800/667 x 4 DIMMs, Max. 8gb



MOTHERBOARD SUPPORTS 1 TO 3 PHYSICAL GRAPHICS CARDS (CROSSFIRE SUPPORTED) AND HAS THE FOLLWING PORTS:

- 3x PCIe2.0 x16
- 3x PCI (3x ATI CrossFireX™ support)
- PCIe Generation 2.0 support




MOTHERBOARD HAS THE FOLLOWING HARD DRIVE CONNECTIVITY:

- SATA / RAID / IDE / ESATA
- 1 x ATA133
- 2 x 1394a
- 6 x SATA II
- 2 x eSATA


MOTHERBOARD ETHERNET PORTS:

- x2 Gigabit LAN PORTS by BroadcomTM PCIe and PCI LAN chip



MOTHERBOARD USB CONNECTIVITY:

- x12 USB 2.0 port support (including headers on the motherboard)




MOTHERBOARD CHIPSET:

- Intel® X48 & ICH9R Chipset




MOTHERBOARD BIOS:

- Dual Quantum BIOS (enhanced for overclocking)



MOTHERBOARD COOLING SOLUTIONS (4in1 Quantum Cooler), ARE AS FOLLOWS:

- Water cooling (via included 3/8" and 1/2" barbs)
- Active air (by fitting an fan to northbridge)
- Passive air cooling (by removing watercap & barbs altogether)
- Extreme cooling (Using included extension tower for LN2 or Dry ice)



MOTHERBOARD POWER:

- 8 phase Digital PWM; provides more robust power delivery, standing up to the demands of enthusiasts and overclockers.

- 100% SOLID Capacitor & Ferrite Choke Design; Foxconn’s 100% SOLID Capacitor design improves component reliability, by replacing electrolytic capacitors with solid versions



--------------------------------------------------------------------------------------------------------



THE RAM INCLUDED IS AS FOLLOWS:

2 x OCZ OCZ3X13334GK (DUAL PACK) PC3-1066 DDR3 1333MHz Intel Extreme 4 GB Dual Channel Kit (GIVES YOU A TOTAL OF 8GB)


- DDR3 1333MHz
- XMP Profile 1: 1333MHz 7-7-7-20 1.75V
- XMP Profile 2: 1600MHz 9-9-9-28 1.8V
- Intel Black XTC Heatspreader
- Optimized for Intel X38/X48 Chipset

--------------------------------------------------------------------------------------------------------


THE CPU HEAT-SINK INCLUDED:

- 1 x Scythe Infinity / Mugen Heatsink




NOTE:

The included motherboard is an enthusiast motherboard, it was very expensive new (£259) and has major overclocking features. The Quad Core processor is a Q6600 SLACR GO version which will run at 3.4Ghz stable and air cooled with the included Scythe heat sink on the included motherboard. It could be pushed much higher if you water cooled your setup and optimized your settings.



The Q6600 'none' SLACR GO versions are NOT to be compared with this processor as they are not good over-clockers, mine on the other hand is brilliant.

The included video shows a Q6600 processor running BF3

Suggested similar ads

View all ads

Sponsored Links