Complete working server unit in 2U rack mountable lockable cases.

You are looking at a Tyan Thunder K7X Pro Dual AMD Socket 462 Motherboard S2466 or s2469, with 2 AMD Athlon 2000, heat sinks, fans, 4GB ram, 200GB hard drive

Please check this link for more information and driver:
http://www.tyan.com/archive/products/html/tigermp_spec.html

Specs:

Specifications

Processor
• Dual PGA462 ZIF sockets 2000+MP Athlon CPUs
• Supports up to two AMD Athlon MP processors
• Two onboard VRMs
• Front-Side Bus support for 266/200MHz

Chipset
• AMD-760 MP chipset
• AMD-762 north bridge & AMD-766 south bridge
• Winbond™ W83627HF Super I/O ASIC

Memory
• Four 184-pin 2.5-Volt DDR DIMM sockets
• Supports up to 4GB * of Registered DDR 200/266
• Supports ECC (72-bit) memory modules

Expansion Slots
• One AGP slot supports 4x/2x AGP modes
• Four 64-bit 33MHz (5-volt) PCI slots
• Two 32-bit 33MHz (5-volt) PCI slots
• Total of seven usable slots

Integrated I/O
• One floppy connector supports up to two drives
• Two 9-pin 16550-based serial ports
• One 25-pin SPP/ECP/EPP parallel header
• Four USB ports (two stacked rear connectors
and two front panel headers)
• PS/2 keyboard and mouse ports

* Note: The AMD-760 MPX requires a portion of memory to be reserved for PCI devices. Allocation for these devices is dependent on the number of PCI devices installed, and option ROM for each device. Common configurations will see 3.5GB to 3.8GB of available memory.


Integrated PCI IDE
• Dual-channel master mode
• Supports up to four enhanced IDE devices
• Support for DMA100/66/33 IDE and
ATAPI compliant devices

System MonitorSystem Management
• 3-pin fan monitoring headers
• 3-pin Wake On LAN header (optional)
• Winbond W83782D hardware monitoring ASIC
• System Monitoring Software: here

BIOS
• Phoenix BIOS 4Mbit Flash ROM
• User settings for hardware monitoring (option)
• Auto-configuration of IDE hard drive types
• Multiple boot options
• DMI 2.0 compliant

Form Factor
• ATX footprint (12" x 10.3", 304.8 x 261.62mm)
• 20-pin power connector
(300+W, +5V must be 30A+)
• Stacked parallel (one) and serial (two) ports
• Stacked USB (two) ports
• Stacked keyboard and mouse ports

Note: The Tiger MP S2460 accepts a standard ATX-style power supply. However, the P/S must be able to supply a minimum of 30A on the 5-volt line. Many 300+ watt power supplies on the market today are capable of this output.

Regulatory
• FCC DoC (Declaration of Conformity) certified
• European CE (Declaration of Conformity)

please call Glen on 07753509189 or email cyth0n@yahoo.co.uk
£80

Contact details

• Email: Click here to reply to this ad
• Phone: Glen on 07753509189

Anti spam: Do NOT contact me offering services or anything of a commercial nature.