100P Power Amplifier,mint condition,box

* Digitally-controlled muting
* Toroidal power transformer
* 'Straight Line Technology'
* Gold-plated phono connectors
* Multi-room or multi-zone applications
* Proprietary Sorbothane® sonic isolation feet
* Independent power supplies for each channel
* Signal output to connect to other power amplifiers
* 60 W per channel into rated load impedance (8 Ω),
95 W into 4 Ω and 130 W into 2 Ω for short periods
* Duplicated loudspeaker terminals for bi-wired speakers

This section is for those of you who really want to know the 'insides' of your 100P. You will not miss out on any of the functions or performance of your 100P if you choose not to read any further.
rated output
power
(both channels driven) 100 W per channel into rated load impedance (8 W)
150 W into 4 W and 190 W into 2 W for short periods
typical output
power
(both channels driven) 120 W per channel into rated load impedance (8 W)
180 W into 4 W and 220 W into 2 W for short periods
input for full
rated power 1.0 V rms
input
impedence 47 kW nominal
gain 29.0 dB at 1 kHz
signal to noise greater than 95 dB (relative to 0 dbW)
frequency response (-3 dB) 0.1 Hz - 75 kHz
frequency response
(20 Hz - 20 kHz) ± 0.3 dB
total harmonic
distortion + noise less than 0.05%
channel balance ± 1 dB
channel separation greater than 80 dB (20 Hz - 20 kHz)
polarity(phase) non-inverting for all inputs and outputs
operating temperature range 10 - 35oC
ac supply
frequency 50 - 60 Hz
ac supply
voltage 110 -120 V or 220 - 240 V
The voltage is marked on the rear of the unit
power
consumption less than 500 W
dimensions
(including feet,
terminals and controls) 445 mm wide
75 mm high
333 mm deep

Contact details

• Email: Click here to reply to this ad

Anti spam: Do NOT contact me offering services or anything of a commercial nature.